Induction cooking has become the gold standard for homeowners who want fast, precise heat without the open flame of gas. Yet the biggest question our residential clients ask is, “What will an induction cooktop installation cost?” CountBricks tracks real-time material prices, local labor rates, and code requirements to deliver crystal-clear estimates in seconds—whether you’re chatting through our mobile app or speaking directly to our AI voice assistant.
The cooktop itself forms the base of your budget.
• Standard 30-inch induction models: $800 – $1,400
• Premium 36-inch smart or downdraft models: $2,000 – $4,000+
• Commercial-style 48-inch units: $4,500 – $7,000
Induction units draw between 30 and 50 amps. If your existing service panel lacks available amperage, CountBricks will flag an upgrade during the takeoff.
• New 40-amp circuit with 240-V breaker: $350 – $550
• Full panel replacement (100-amp to 200-amp): $1,800 – $3,200
• Utility service upgrade (if required by local jurisdiction): $1,000 – $2,500
Running 6-gauge copper and installing a NEMA 14-50R receptacle is routine but labor-intensive in older homes.
• First-floor kitchens with accessible crawl space: $300 – $600
• Multi-story retrofits requiring wall fishing: $600 – $1,200
Swapping a gas or radiant electric cooktop for induction often means resizing an existing cut-out.
• Minor trim cuts in laminate or butcher-block: $150 – $250
• Stone countertop re-cut (granite, quartz): $400 – $800
Although induction produces less ambient heat than gas, most building codes still demand adequate ventilation.
• Replace existing hood with low-profile unit: $450 – $850
• Install remote inline blower for quiet operation: $900 – $1,600
When we combine appliance, labor, electrical, and finish work, CountBricks residential projects in Southern California typically range:
• Budget installations (panel ready, no structural work): $2,200 – $3,400
• Mid-range installations (new circuit, stone re-cut): $3,800 – $5,200
• High-end installations (panel upgrade, custom hood): $5,500 – $9,000
Unlike manual spreadsheet estimates, our platform listens to your on-site walkthrough, transcribes scope in real time, and auto-populates material and labor assemblies from our residential construction database. The result is a line-item estimate with up-to-the-minute pricing, ready to share as a professional PDF or invoice.
• Voice-driven takeoffs mean zero missed details
• AI suggests code-compliant breakers, wire sizes, and duct runs
• Adjustable profit margins let you fine-tune bids on the fly
• One-click export to CountBricks.com/services keeps your team in sync
Material costs and permit fees shift by zip code. In Los Angeles, copper wire has spiked 12 % year-over-year, while permit fees average $250. CountBricks geolocates every estimate, so homeowners never face surprises on the final invoice.
• Schedule a panel load calculation before buying the cooktop
• Run conduit during any kitchen demo to reduce drywall patching later
• Opt for a model that matches your existing cut-out to skip countertop fabrication
• Bundle hood replacement with cooktop install to save on electrician mobilization
• Use CountBricks voice notes to flag owner-supplied appliances and avoid markup confusion
Yes. Induction works with magnetic cookware (cast iron, many stainless blends). CountBricks estimates can include an allowance for induction-ready pots if requested.
Absolutely. Our AI database includes clearance requirements to ensure safe stacking.
1. Electrical rough-in: 1 day
2. Countertop modification: 2–4 hours
3. Appliance set and test: 2 hours
Most projects close out in two working days when scheduled through CountBricks.
Ready for precise numbers? Start a voice session on the CountBricks app, or visit CountBricks.com/consultation to schedule a virtual walkthrough. Within minutes you’ll receive a shareable, build-ready estimate for your induction cooktop installation cost.
A Los Angeles homeowner approached CountBricks to swap a 36-inch gas cooktop for a high-efficiency induction model. During a five-minute voice walkthrough, our AI captured the scope: new 50-amp circuit, quartz re-cut, and hood replacement.
• Appliance allowance: $2,600 for a smart 36-inch induction unit
• Electrical: $475 for breaker, 35 ft of 6-3 copper, and labor
• Countertop re-cut: $600 including on-site polishing
• Low-profile hood: $780 supplied and installed
• Permit & inspection: $260 based on city schedule
Total projected cost: $4,715
1. CountBricks’ materials API auto-updated copper pricing two days before work started, reducing contingency by $82.
2. The installer used CountBricks’ task timer, shaving one labor hour and saving the homeowner $95.
3. Post-project, our instant invoice integrated with the client’s payment portal, closing the job within 24 hours.
• “CountBricks gave me numbers I could trust—no last-minute add-ons.”
• “Being able to approve change orders from my phone was a game-changer.”
• End-to-end workflow: Estimate, proposal, schedule, and invoice on one platform
• Real-time pricing: National database refreshing every 24 hours
• Code intelligence: Automatic NEC and Title 24 checks baked into every task
• Voice-first interface: Hands-free data capture while you’re still on-site
Whether you’re upgrading a single appliance or pushing for full gas-to-electric conversion, CountBricks streamlines every phase. Start your induction cooktop installation estimate today at CountBricks.com/services and see how far accurate data can take your residential projects.
