Conduit Bender Rental Rates in Portland (Daily/Weekly) — 2026 Costs

Conduit Bender Rental Rates Portland 2026

For Portland-area electrical rough-in, conduit bender equipment hire typically breaks into three pricing bands for 2026 planning: (1) hand EMT benders (1/2 in. to 1 in.) at roughly $10–$25 per day, $35–$90 per week, and $90–$220 per month when sourced as “trade hand tools”; (2) electric benders (commonly 1/2 in. to 2 in. EMT/IMC/rigid packages such as a Greenlee 555-class machine) at $140–$240 per day, $450–$850 per week, and $950–$1,900 per 4-week month; and (3) larger hydraulic table benders (2-1/2 in. to 4 in.) at $275–$475 per day, $950–$1,650 per week, and $2,600–$4,900 per month, depending on shoe coverage and whether a bending table/cart is bundled. In practice, Portland branches of national houses (e.g., United Rentals, Sunbelt, Herc) and local tool yards quote differently based on account terms, shift rules, and whether inside delivery is required for downtown access constraints.

What You Are Actually Renting: Hand Benders vs. Electric vs. Hydraulic

Before you lock a budget number, define the conduit bender hire scope the same way the rental counter will define it. A “conduit bender” can mean a simple hand bender head and handle for EMT, or it can mean an electric/hydraulic machine with multiple shoe groups, a bending table/cart, and (for larger sizes) a compatible hydraulic pump.

• Hand EMT benders (1/2 in., 3/4 in., 1 in., sometimes 1-1/4 in.): lowest hire cost, highest labor dependence. For reference, published day rates for hand conduit benders in various rental catalogs commonly land in the low teens per 24-hour day (e.g., 24-hour pricing for 1/2 in. to 1-1/4 in. hand benders shown in published rate pages).
• Electric benders (1/2 in. to 2 in. packages): higher rental rate, but they de-risk schedule on multifamily rough-in where you’re producing repeatable offsets and 90s at volume. A Portland-metro electrical supply/rental rate sheet has historically listed an electric bender in this class around $50/day, $200/week, $500/month (noting those sheets can be dated and should be escalated for 2026 planning).
• Hydraulic table benders (2-1/2 in. to 4 in.): typically rented as a system—bender + table/cart + shoe sets; mobilization and delivery logistics can be as important as the rate. A published rate sheet example shows $150/day, $450/week, $1,500/month for a 2-1/2 in. to 4 in. hydraulic table bender class item (again, use as a baseline, not a guarantee).

Portland Rough-In Cost Drivers That Move Conduit Bender Equipment Hire

In Portland, conduit bender hire cost variances are usually not caused by the base day rate—they are caused by the “job conditions” that change delivery, access, billing clocks, and return condition:

• Downtown access, staging, and freight elevator windows: If your site requires a timed delivery window (e.g., 6:00–7:00 AM), inside delivery, or a liftgate, it is common to see added logistics charges. Plan allowances like $95–$185 per trip for standard metro delivery/pickup, plus $3.50–$6.00 per loaded mile outside a typical service radius. (Many yards also apply a minimum $75–$125 logistics charge even for close-in runs.)
• Wet-weather return condition: Portland’s rain season increases the probability that benders, shoes, and carts come back with grit and surface corrosion. Build in a realistic cleaning allowance: $45–$125 “tool cleaning” and, for larger carts/tables, $95/hour shop labor is a defensible placeholder. A published rental policy example shows cleaning billed at $65/hour for equipment and $25 for tools in one market.
• Credit card surcharges and admin adders: Some Portland-area yards have disclosed a 3% surcharge on credit card payments effective January 1, 2026. If your AP team can pay by ACH/check, you can avoid a non-trivial fee on longer bender hires.

Typical 2026 Planning Rates by Conduit Type and Capacity (No Account Discounts Assumed)

Use the ranges below for estimating conduit bender equipment hire cost in Portland when you do not yet have a quote. These reflect common market structures (daily/weekly/4-week), escalated for 2026 planning and assuming a single shift unless noted.

• Hand EMT bender (single size, e.g., 1/2 in. or 3/4 in.): $10–$25/day; $30–$70/week; $90–$220/4-week. Published examples show day rates around $10 for thin-wall conduit benders and 24-hour rates in the low teens depending on size.
• Electric conduit bender, 1/2 in. to 2 in. (555-class): $140–$240/day; $450–$850/week; $950–$1,900/4-week. For reference, published national/co-op lists have shown 555-class daily pricing around $127/day and $924 for a 4-week period (your Portland market quote may differ). (g
• Single-shoe bender package, 1/2 in. to 2 in. (higher-duty shoe compatibility): $160–$290/day; $550–$1,050/week; $1,300–$2,400/month. A historical regional sheet has listed $125/day, $375/week, $1,000/month for a 1/2 in. to 2 in. single-shoe bender class item (baseline only).
• Hydraulic table bender, 2-1/2 in. to 4 in. (plus pump/table): $275–$475/day; $950–$1,650/week; $2,600–$4,900/month. (Expect shoe and table/cart line items if not bundled.)

Hidden-Fee Breakdown for Conduit Bender Hire in Portland

When conduit bending becomes critical-path for electrical rough-in, “hidden fees” are usually predictable if you ask the right questions at the time of order. Build these as explicit allowances so you do not have to back-charge later:

• Minimum rental term: Many yards apply a 4-hour minimum on time-based items; even on small hand tools, a 3-hour/8-hour/24-hour structure is common.
• Shift / overtime multipliers (metered or ‘single shift’ items): If your bender is treated as a shift-based machine, plan 1.5x day rate for a double shift and 2.0x for a triple shift when applicable. (g
• Weekend billing rule: Some policies treat late Saturday pickup as a paid day (or price weekends at 1.5x the daily rate). If you intend to “float” through the weekend, confirm the exact rule in writing.
• Damage waiver / rental protection: Commonly 10%–15% of the rental charges, excluding consumables. If you waive it, confirm your insurance certificate requirements and deductibles.
• Deposit / pre-auth: For non-account rentals, plan $100–$500 pre-authorization for hand tools and $500–$2,500 for electric bender packages depending on replacement value and payment method.
• Missing shoe fees: Shoe groups are frequently billed separately. Example published pricing for shoe groups includes $25/day, $100/week, $250/month for EMT or rigid shoe groups; PVC-coated shoe groups can be higher.
• Cleaning and return-condition charges: Plan $45–$125 for light cleaning; $95–$150 for heavy mud/grit; or $95/hour shop labor in some contracts.
• Late return penalties: A common structure is a fraction of the day rate (e.g., 1/6 day per hour late after a grace period) or an additional full day. Confirm “clock time” cutoffs (often 7:00 AM–5:00 PM branch hours).
• Delivery and pickup: If you cannot pick up, build $95–$185 each way for metro runs; add a second trip allowance (+$95–$185) if the bender must be swapped due to shoe mismatch mid-rough-in.
• Credit card processing surcharge: Where applicable, 3% of invoice total if paid by credit card (policy-dependent).

Example: Electrical Rough-In on a 6-Story Multifamily in Inner SE Portland

Scenario: Two crews need to rough-in (a) unit corridors with 3/4 in. EMT and (b) a service room with 2 in. EMT sweeps. Building rules: deliveries only 6:30–7:00 AM, freight elevator requires a COI on file, and all equipment must be staged on level 1 behind a badge-controlled door. The GC requires photo documentation at delivery and return.

Plan (2026 estimate, no contract discounts):

• Hand bender (3/4 in.) for corridor work: $15/day x 10 working days = $150 (or convert to a monthly if your yard offers a $140–$220 4-week equivalent for hand tools).
• Electric bender package (1/2 in. to 2 in.) for service room: $195/day x 6 days = $1,170 (or $650/week x 1 week + $195/day x 1 day depending on rate structure).
• Shoe groups not included (allowance): $25/day x 6 = $150 (EMT and rigid shoes are often separate line items).
• Damage waiver allowance: 12% of rental charges (apply to the above) = ~$177.
• Timed inside delivery + pickup (two trips): $165 each way x 2 = $330 (higher due to downtown-style access control and elevator coordination).
• Cleaning allowance for wet-weather return: $95.
• Credit card surcharge risk (if paid by card): 3% of subtotal (exclude if paying by ACH).

Estimated conduit bender equipment hire total: budget $2,200–$2,600 for the rough-in phase described once access-driven logistics and waiver are included. The operational constraint that moves cost most is the restricted delivery window; if you miss the window, it commonly triggers a second mobilization charge (plan +$165).

Budget Worksheet (Portland Conduit Bender Equipment Hire)

Use these line items in your estimate so the conduit bender rental cost is auditable and easy to reconcile against vendor invoices (no tables; copy/paste into your bid worksheet):

• Hand EMT bender(s), 1/2 in.–1 in.: allowance $15/day each (or $160/month each if you expect multi-week rough-in).
• Electric conduit bender (1/2 in.–2 in.) base unit: allowance $195/day or $700/week.
• Shoe groups (EMT / rigid / PVC-coated): allowance $25–$60/day per group depending on coating/coverage.
• Bending table/cart (if required): allowance $45–$95/day.
• Delivery + pickup (Portland metro): allowance $95–$185 each way (add mileage outside radius).
• Timed/inside delivery premium (badged buildings): allowance $50–$150 per event.
• Damage waiver / rental protection: allowance 10%–15% of rental charges.
• Cleaning allowance (wet-weather / jobsite grit): allowance $95 per return.
• Late return allowance: allowance $50–$200 per incident (rate-structure dependent).
• Payment processing (if applicable): allowance 3% on credit card paid invoices.

Rental Order Checklist (For the Rental Coordinator)

• Confirm conduit types and sizes: EMT vs. IMC vs. rigid; minimum/maximum diameter (e.g., 1/2 in.–2 in.).
• Confirm shoe coverage in writing: list every shoe size required; confirm PVC-coated shoes if applicable to the spec.
• Confirm billing basis: “time out” vs. “time used,” and whether the bender is treated as a shift/metered item (single shift vs. double shift multipliers). (g
• Confirm minimum rental and weekend rules: 4-hour minimums, Saturday pickup cutoff, Monday return time, and holiday billing policy.
• Delivery plan: address, jobsite contact, gate codes, badge requirements, staging location, freight elevator reservation time.
• PO requirements: cost code, NTE (not-to-exceed) amount, authorization for damage waiver %, and who can sign delivery tickets.
• Return documentation: photo set (overall + shoes + serial plate), condition notes, and “off-rent” notification method (email/time-stamped call).
• Power requirements: confirm if the electric bender needs 120V/20A, extension cord length, and GFCI constraints inside partially finished spaces.
• Return condition: wipe-down expectations; confirm any cleaning fee triggers for mud/grit and how they’re billed.

Where the ‘Monthly Rate’ Can Mislead on Electrical Rough-In

Rental houses often quote a 4-week month (not a calendar month) and apply off-rent rules that require you to notify the branch before a cutoff time (commonly early afternoon) for billing to stop next day. If you demobilize late on a Friday without calling it off-rent until Monday, you may carry weekend time. To manage conduit bender equipment hire cost tightly, align your demob plan with (1) the vendor’s cutoff, (2) your GC’s elevator schedule, and (3) your crew’s ability to clean/wipe shoes and document condition at return.

How to Reduce Conduit Bender Hire Cost Without Creating Rough-In Risk

On Portland electrical rough-in, the cheapest conduit bender rental rate is rarely the lowest total equipment hire cost. The goal is to prevent change orders and remobilizations caused by missing shoes, access restrictions, and billing-clock surprises.

Bundle Strategy: Base Unit vs. Shoe Groups vs. Table/Cart

Many change-cost events occur because the estimator budgets “electric bender” but not the shoe group(s) and support hardware needed on day one. A published example shows shoe groups sometimes billed as separate rentals (e.g., EMT or rigid shoe groups priced independently from the machine).

• Recommendation for rough-in: treat the conduit bender hire as a package with named components: base unit + EMT shoe set + rigid/IMC shoe set (if required) + bending table/cart. Even if a vendor offers a “package,” confirm the serial-numbered accessories on the delivery ticket.
• Allowance adders that commonly appear: $25–$60/day per shoe group; $45–$95/day for table/cart; $15–$35/day for specialty supports (depending on vendor catalog).

Shift, Weekend, and Off-Rent Rules (The Billing Clock Is the Cost Driver)

If your project is pushing extended hours to hit an inspection date, be careful: some rental structures treat machines as single-shift items with multipliers for additional shifts (e.g., double shift at 1.5x and triple shift at 2.0x). (g

Portland-specific operational reality: inspections, firestopping coordination, and elevator availability can force “non-ideal” pickup/return times. Build cost control steps into the superintendent’s weekly plan:

• Delivery cutoff: schedule returns before the vendor’s daily cutoff (often 2:00–4:00 PM) so off-rent is effective the next day.
• Weekend float: confirm whether Saturday PM pickup triggers a paid day or weekend premium; document in the PO notes.
• Meter assumptions: if a bender is hour-metered, assume an 8-hour day, 40-hour week, and 160-hour (4-week) month until your vendor confirms otherwise.

Damage, Loss, and Return-Condition Controls

Conduit benders are easy to “nickel-and-dime” on closeout if you do not manage the return condition. For electrical rough-in, the most common chargebacks are missing shoes, bent handles, and excessive grit on moving surfaces. Implement a simple control process:

• Tool tag and cage control: assign the bender and shoe group to a foreman; store shoes in a labeled tote.
• Return-condition photos: take 6 photos minimum (overall, serial plate, each shoe group, bending table if present, and any pre-existing damage).
• Cleaning before return: plan 30 minutes of labor to wipe down; this often avoids a $95–$150 cleaning line item.

Portland Local Considerations That Affect Conduit Bender Equipment Hire

• No state sales tax, but do not assume ‘no adders’: Even without sales tax, your invoice can still include damage waiver %, environmental/admin charges, delivery, and (where applicable) payment surcharges.
• Bridge and traffic timing: If you are staging from a westside yard but working eastside (or vice versa), build extra buffer for delivery/pickup windows; a missed window often becomes a second trip charge (plan +$95–$185).
• Moisture and surface rust: During wet months, return condition expectations matter more; ask the vendor whether light surface oxidation is treated as normal wear or billable refurbishment.

When Ownership Beats Hire (A Quick Threshold for Rough-In Managers)

For hand benders, ownership often beats hire quickly if your crews are bending daily. For electric/hydraulic benders, hire can still win if utilization is intermittent and you can off-rent aggressively. As a rough budgeting rule, if you expect to keep a 555-class electric bender continuously for 12+ weeks across multiple projects, compare the projected rental spend ($950–$1,900 per 4-week month) against ownership plus maintenance and storage logistics.

Procurement Notes for Faster Quotes (Email Template Inputs)

To get accurate conduit bender equipment hire pricing from Portland suppliers without multiple back-and-forth calls, include:

• Project address and whether it is downtown/controlled access.
• Conduit types (EMT/IMC/rigid/PVC-coated) and exact sizes needed (e.g., 3/4 in. EMT daily, 2 in. EMT for service room).
• Requested term: 2 days, 1 week, or 4 weeks with expected off-rent date.
• Delivery requirements: standard curbside vs. inside delivery; delivery window (e.g., 6:30–7:00 AM).
• Billing structure required: day/week/4-week, and any shift expectations (single vs. double shift).
• COI requirements, waiver preference (accept 10%–15% damage waiver or provide insurance), and payment method (avoid card surcharge where applicable).