The kitchen range hood is one of the most visible metal surfaces in a residential remodel. When it looks tired or mismatched, the entire space feels dated. Homeowners regularly search for the true cost to paint a hood, yet find conflicting numbers. CountBricks clarifies that price and delivers accurate, real-time figures through our AI-driven estimating platform. Whether you are a contractor preparing a proposal or a homeowner planning a DIY refresh, understanding every cost component is the first step to controlling your budget.
1. Material Type
Stainless steel, powder-coated steel, and copper each require different prep methods and primers. Specialty primers add material expense and labor time.
2. Hood Size & Complexity
A slim 30-inch under-cabinet hood takes less paint and masking than a custom 48-inch chimney hood with decorative trim. Complex shapes increase labor hours.
3. Surface Condition
Existing grease, scratches, or flaking factory paint all demand additional cleaning, sanding, and filler. Skipping this prep leads to costly callbacks.
4. Finish Level
Standard satin enamel is the most affordable. High-gloss, color-matched, or specialty heat-resistant coatings boost material cost by 15-40 percent.
5. Jobsite Setup
Painting in place requires intensive masking of nearby cabinetry and appliances. Removing the hood for shop spraying lowers masking time but adds disassembly and reinstallation hours. Transportation and shop overhead also factor in.
Using aggregated supplier pricing and regional labor rates fed directly into CountBricks.com/services, our latest data for the New York metro area shows:
• Basic 30-inch hood, cleaned and sprayed in place: $280 – $375
• Mid-size 36-inch chimney hood, removed and sprayed off-site: $430 – $610
• Large 48-inch custom hood with high-gloss finish: $780 – $1,050
These figures include material, labor, minimal masking, and one site visit. They exclude unexpected repairs, expedited scheduling, and design consultations. Contractors can pull live numbers inside the CountBricks voice interface to update quotes on the spot.
Many homeowners consider a weekend DIY project to keep costs low. Before committing, compare actual expenses:
• Specialty primer and finish paint (1 qt each) – $65
• HVLP rental for two days – $80
• Abrasive pads, solvents, PPE, masking film – $45
• Your time—typically 6 to 8 hours spread over two days
That places the baseline DIY expense near $190 plus your labor and risk. A single paint run or adhesion failure could double the cost when you need to start over. Professional crews using shop spray booths produce factory-level finishes in a controlled environment, backed by warranty.
Traditional estimating relies on static spreadsheets that become outdated the moment paint prices change. CountBricks replaces guesswork with AI-powered tools:
• Voice-to-estimate: Walk the site and speak details; our engine converts words into line items within seconds.
• Live material feeds: Pricing updates every 4 hours, ensuring your quote reflects current supplier costs.
• Labor mapping: Region-specific wage data and productivity factors adjust automatically for metropolitan or rural crews.
• Blueprint takeoffs: Upload PDF plans, and CountBricks identifies hood dimensions, quantities, and finish specs instantly.
Contractors use these features to present homeowners a professional proposal on-site, complete with color options and timeline. Homeowners gain confidence that the number is grounded in reality—not a ballpark figure.
1. Disconnect power, remove filters, and label wiring for easy reinstallation.
2. Degrease thoroughly with trisodium phosphate substitute and rinse.
3. Scuff-sand with 320-grit pads to ensure mechanical adhesion.
4. Mask interior fan and light assembly to prevent overspray.
5. Apply metal etch primer at 2 mils wet film thickness; allow 1-hour flash time.
6. Spray two coats of finish enamel, 30 minutes apart, maintaining 10-inch gun distance.
7. Cure for 24 hours before reinstalling filters and testing the fan.
• Maintain 70-degree ambient temperature to avoid orange peel and sags.
• Use tack cloth after sanding—dust entrapment ruins gloss.
• Cross-hatch spray patterns for even coverage on curved edges.
• Opt for color-matched caulk to hide minor seam imperfections.
• Document paint codes in CountBricks.com/portfolio for future touch-ups.
• Skipping degreasing: Residual oil causes fisheyes in finish.
• Over-masking louvers: Blocked vents lead to motor overheating on restart.
• Inadequate cure time: Re-installing filters too soon imprints brush marks and scratches.
CountBricks checklists, available inside every project dashboard, walk crews through QA steps to eliminate these costly errors.
You can request a live, itemized estimate in under five minutes. Simply start a voice conversation inside the CountBricks app or visit CountBricks.com/consultation. Our AI quantifies every square inch, applies real-time material and labor costs, and generates a polished PDF ready for client signature. Stop guessing the cost to paint a hood—start building with confidence.
When the Martinez family purchased a 1,200 sq ft Manhattan loft, the existing stainless hood was yellowed from years of open-flame cooking. Replacing it with a new designer model carried a $2,400 price tag plus structural modifications. Instead, their contractor used CountBricks to calculate the cost to paint the hood and achieved a like-new look for a fraction of the expense.
• Hood size: 36 in × 18 in chimney style
• Desired finish: Matte black, heat-resistant enamel
• CountBricks AI estimate: $515, itemized as $128 materials, $320 labor, $67 shop logistics
• Actual final invoice: $512, a 0.6 percent variance thanks to live pricing updates
1. Blueprint takeoff pinpointed hood dimensions from the renovation plan, saving 45 minutes of manual measuring.
2. Voice-to-estimate captured onsite notes about existing grease build-up, automatically adding a cleaning allowance.
3. Material feed flagged a temporary paint rebate, passing a $22 savings directly to the homeowner.
4. CountBricks scheduling tool coordinated pick-up, shop spray, and reinstallation in one business day, minimizing kitchen downtime.
The matte black hood now anchors the industrial aesthetic of the loft, matching new cabinet pulls and lighting fixtures. Mrs. Martinez noted that the streamlined digital paperwork “made approving the quote almost effortless.” The contractor, meanwhile, secured full payment on the day of completion with a CountBricks-generated invoice linked to online payment.
• Use CountBricks.com/services to compare painting vs. replacement ROI within minutes.
• Capture onsite variables with our mobile voice tool so your quote reflects real conditions, not assumptions.
• Store finish codes in the project dashboard to simplify future maintenance visits.
From compact condos to sprawling suburban kitchens, CountBricks delivers the precision and speed you need to nail the cost to paint a hood—every single time.
