Denver’s famously wide temperature swings make efficient heating and cooling a must for every homeowner. A modern heat pump delivers both, drawing warmth from outdoor air in winter and pushing indoor heat outside during summer. When you partner with CountBricks, you get more than an energy-smart appliance—you receive an AI-powered estimating and project management experience tailored to Colorado’s residential market.
• High elevation means cool nights year-round—perfect for heat pump efficiency
• Dry air reduces frost buildup on outdoor coils, lowering maintenance
• Ever-rising natural-gas costs make electric heat pumps financially attractive
• Federal and state incentives often offset a sizable portion of install costs
Cold-climate inverter models, dual-fuel systems that pair with existing furnaces, and ductless mini-splits each offer distinct advantages. CountBricks designers match equipment to your home’s insulation level, electrical service, and zoning needs so you never overpay for capacity you’ll never use.
1. Voice-Guided Site Walkthrough: Using your smartphone, speak naturally while moving through the property. CountBricks captures dimensions, insulation notes, and electrical panel data in real time.
2. Instant AI Takeoff: Our algorithm converts spoken notes and photos into a digital blueprint, highlighting line-set routing, outdoor unit clearances, and breaker requirements.
3. Transparent Estimate: Within minutes you’ll see a live materials list—heat pump model, line-set length, disconnect box, pad, permits—and labor tasks down to quarter-hour increments.
4. Client-Designer Handoff: Review options in an interactive portal. Adjust SEER rating, add duct sealing, or bundle an electrical panel upgrade. Updated pricing appears instantly.
5. Signed Quote to Work Order: One click converts the approved quote into a field-ready work order. Technicians arrive with synced material lists and installation notes.
6. Close-Out & Warranty Packet: After commissioning, receive a digital warranty file plus performance data stored in your CountBricks dashboard.
• Equipment Efficiency: Higher SEER2/HSPF ratings raise upfront cost but can slash utility bills by up to 50 %
• Electrical Upgrades: Homes with 100-amp service may need a panel upgrade—our AI estimator flags this early
• Ductwork Condition: Leaky or undersized ducts add labor and materials; ductless systems bypass this expense
• Permit Fees: Denver’s permit structure varies by tonnage and electrical scope; fees are automatically calculated inside CountBricks.com/services
• Ductless single-zone mini-split: $5,900 – $8,200 installed
• Central air-source heat pump (2-3 ton): $11,400 – $16,800 installed
• Dual-fuel upgrade with existing furnace: add $2,200 – $3,500 to base system
Every figure above originates from completed CountBricks projects across the Front Range, not generic national averages.
1. Arrival & Prep: Crews protect flooring, stage tools, and verify electrical lockout.
2. Outdoor Unit Placement: We level a composite pad, set the condenser, and establish required clearances.
3. Line-Set & Electrical: Refrigerant lines run through inconspicuous chases; a dedicated circuit lands in the panel.
4. Indoor Air Handler: Mounted on vibration-isolating brackets. Duct connections sealed to 0.08 in. w.g.
5. Commissioning: Digital manifold ensures factory-spec superheat/subcool targets. Performance data uploads to your CountBricks dashboard.
6. Homeowner Walk-Through: We pair thermostats to Wi-Fi, demonstrate modes, and review maintenance essentials.
CountBricks tracks your energy consumption curve for 12 months post-install. If actual savings miss our projections by >10 %, we recalibrate system settings or rebate part of your upgrade—guaranteed.
• Schedule installation in spring or fall for faster permit approvals
• Combine heat pump work with attic insulation to unlock extra rebates
• Install a smart thermostat eligible for Xcel Energy demand response credits
• Keep snow clearance at 18 in. around the outdoor unit to avoid defrost cycles
• Book an annual service plan at CountBricks.com/services for peak efficiency
Whether you’re replacing a 90s-era furnace or building a high-performance home, CountBricks unites AI precision with hands-on craftsmanship. Explore recent projects at CountBricks.com/portfolio or request a voice-guided estimate today.
When the Morales family’s 2,400 sq ft split-level saw winter gas bills hit $380, they reached out via the CountBricks voice app. In under 12 minutes, the AI takeoff mapped their existing duct layout, flagged a 100-amp electrical panel, and produced two options:
• 14.5 SEER2 standard heat pump with strip heat
• 18 SEER2 cold-climate inverter paired to a new 200-amp panel
Total project price appeared instantly: $13,950 vs. $17,880. The family chose the high-efficiency package after seeing a projected five-year payback.
1. Permit in 48 hours thanks to digital submittals
2. Panel upgrade completed day one, eliminating return trips
3. Factory commissioning data uploaded to CountBricks dashboard, confirming 42 % energy reduction after month three
• Even “adequate” electrical service can bottleneck future appliance additions—plan ahead
• Real-time AI estimates encourage informed decisions without sales pressure
• Data logging after install validates ROI and keeps contractors accountable
• Single-Platform Workflow: From blueprint takeoff to final invoice, every step lives in the CountBricks ecosystem—no dropped emails or missing change orders
• Local Expertise: Our crews are Denver-based, trained on altitude-specific charging, and familiar with city inspection nuances
• Flexible Financing: Soft-pull credit checks and same-day approvals mean you can capture limited-time rebates without cash delays
Upgrade your comfort the intelligent way. Start your own voice-guided estimate at CountBricks.com/consultation and see why Denver homeowners rate us five stars for accuracy, speed, and transparency.
