Floodlights add security, curb appeal, and peace of mind, but the first question our residential clients ask is straightforward: how much does it cost to install a floodlight? Because CountBricks generates real-time estimates through voice conversations, we have an unmatched view of actual project numbers across neighborhoods, fixture brands, and installation scenarios.
Across thousands of CountBricks residential takeoffs, the installed price for a single hard-wired LED floodlight typically falls between $225 and $650. That range might appear wide, yet the variables behind it are equally broad. Understanding those variables lets you budget accurately and avoid unpleasant surprises.
• Fixture cost: $45 – $220 per unit, depending on lumens, smart-home features, and finish
• Labor: $90 – $150 per hour for a licensed electrician; most installs require 1–3 hours
• Switch or smart controller upgrade: $40 – $120 for materials plus 30–60 minutes of labor
• Wiring & conduit: $1.75 – $3.50 per linear foot when the existing circuit is full or distant
• GFCI/weatherproof box: $18 – $35 for exterior code compliance
• Permitting & inspection (where required): $35 – $110, often bundled into the electrician’s fee
CountBricks feeds each of these items into our AI estimating engine, updating costs daily from regional supplier APIs. When prices shift, your quote shifts in seconds, not weeks.
1. Existing power source proximity: A floodlight replacing an old fixture can be completed in under an hour, but routing a new circuit through brick veneer and attic space can triple labor.
2. Smart-home integration: Wi-Fi–enabled floodlights and voice-controlled switches add convenience, yet they demand extra programming time and higher material costs.
3. Mounting height: Ladders above 15 ft require a second technician for safety, increasing labor by 20-30 %.
4. Exterior cladding: Fiber-cement and masonry take longer to penetrate and seal than wood siding.
5. Regional code: Some municipalities require a licensed electrician for even low-voltage work, while others allow handyman installation. CountBricks geolocates code requirements inside the estimate so you never miss a mandate.
At first glance, DIY seems cheaper. A homeowner can buy a mid-range $80 LED unit and mount it over the garage in an afternoon. Yet hidden costs creep in:
• Specialized tools such as fish rods, masonry bits, and GFCI testers
• Extra trips to the store when wire length or box type is miscalculated
• Risk of water intrusion or loose connections leading to repeated call-backs
Because CountBricks uses AI to document material lists and installation steps in real time, our residential crews typically finish a single floodlight job in 90 minutes. Leveraging professional efficiency often offsets the apparent labor cost.
One CountBricks homeowner wanted two motion-sensor floodlights—one at the driveway, one at the backyard patio—both tied into a smart speaker. The house had no spare circuit at the exterior panel.
• Two smart LED fixtures: $310 total at live supplier pricing
• 40 ft 12-2 exterior cable, conduit, and watertight fittings: $84
• New 20A breaker and switch: $46
• Labor: 3.5 crew hours at $112/hr = $392
• Permitting and inspection: $75
Total turnkey cost generated by CountBricks: $907. The homeowner received a voice-generated estimate in under five minutes and an automatically formatted quote document for HOA submission.
• Voice-to-Estimate: Speak your scope; our AI builds line items instantly
• Live Supplier Feeds: Lumber, conduit, fixtures, and fittings update daily
• On-Site Blueprint Takeoffs: Photograph your exterior wall, and CountBricks auto-calculates mounting height and beam spread
• One-Click Quote Docs: Send branded PDFs to decision-makers directly from the mobile app
Call our voice assistant or visit CountBricks.com/services to launch a no-obligation session. In less than ten minutes you’ll know exactly how much it costs to install a floodlight at your address—materials, labor, taxes, and permit fees included.
Do I need a permit for a single floodlight?
Many jurisdictions waive permits for like-for-like replacements, but new circuits or smart controllers often trigger inspection. CountBricks includes local requirements automatically.
Can the floodlight share a circuit with my holiday lights?
Yes, provided the amperage load stays within code. Our estimator calculates amp draw in real time so you avoid tripped breakers.
What if I want solar instead of wired?
Solar eliminates wiring labor but the fixtures cost more and deliver lower lumens. CountBricks compares both paths side by side in the estimate.
The real answer to how much does it cost to install a floodlight depends on fixture type, wiring complexity, and local regulations. That’s why CountBricks built an AI model that listens, calculates, and updates instantly. Whether you need one basic LED over the garage or a fully networked perimeter system, CountBricks delivers precise residential construction pricing you can trust.
Homeowners naturally want the lowest possible price, but aggressive cost-cutting can damage long-term value. CountBricks advisors recommend three smart strategies that keep quality high while trimming the total ticket.
1. Bundle Fixtures in One Trip
Labor is charged by the hour, not by the light. Adding a second or third fixture during the same visit spreads the travel and setup cost across more units, often reducing per-light expense by 15-20 %.
2. Pre-Select In-Stock Models
Our live supplier feeds label fixtures as “in stock” or “special order.” Choosing an in-stock unit avoids shipping fees and delays that translate into additional labor mobilization.
3. Use Existing Switch Legs
If a wall switch already controls a porch light, CountBricks can tie the new floodlight into that leg—no new breaker, no extra conduit, and roughly 45 minutes saved.
A Houston townhome owner needed a discrete floodlight above a rear alley garage. Existing wiring was nearby, but the masonry facade worried the client. Using our AR takeoff, CountBricks mapped the precise drill point, reducing the brick penetration to a single ⅝-inch hole. Results:
• Fixture & materials: $172
• Labor: 1.2 hours = $134
• Total cost: $306, 28 % lower than the regional average for similar installs
Traditional quotes list only a lump-sum price, leaving homeowners guessing where dollars go. CountBricks line-item clarity builds trust and empowers informed decision-making:
• Real-time material SKU and cost
• Labor minutes per task
• Overhead and profit displayed separately
Ready to lock in your project? Launch a voice session at CountBricks.com/consultation, or browse finished lighting projects at CountBricks.com/portfolio. In one conversation you’ll receive a sharable quote, projected schedule, and payment milestones—everything needed to illuminate your property with confidence.
