Homeowners often assume that a worn-out bathtub needs full replacement, yet a professional reglaze can restore a tub’s shine for a fraction of the price. At CountBricks, our AI-powered estimating engine answers this core question every day: how much does reglazing a tub cost in a typical residential project? Below, we unpack the numbers, explain the variables, and show how CountBricks streamlines the process for contractors and homeowners alike.
Across the United States, the cost to reglaze a standard 60-inch porcelain, fiberglass, or cast-iron bathtub typically lands between $350 and $900. In markets with a higher cost of living, pricing can reach $1,200. CountBricks data confirms that most projects cluster near the midpoint, around $525, when no major repairs are required.
• Tub material: Porcelain and cast iron require additional prep work compared with fiberglass.
• Existing damage: Chips, rust, or structural cracks add repair labor and specialty filler products.
• Surround condition: Tile demo, caulk removal, or surround masking influence time on site.
• Ventilation constraints: Apartments or tight bathrooms often need temporary fans and duct runs.
• Coating chemistry: Standard epoxy systems cost less than premium polyurethanes with 10-year warranties.
1. Reglazing: $350–$900, completed in one day, no demolition.
2. Tub-only replacement: $1,200–$2,500, plus potential plumbing relocation.
3. Full bath renovation: $8,000–$25,000 when wall finishes and fixtures are upgraded.
For budget-conscious homeowners, reglazing offers savings of 60-80 percent over replacement while extending tub life by 8–15 years.
When a contractor uses CountBricks’ voice interface on site, the platform captures room dimensions, tub material, and damage notes in real time. Our residential cost-library then:
• Retrieves live labor rates and material pricing for the project ZIP code.
• Applies production rates keyed to crew size and coating type.
• Flags code or ventilation requirements that influence setup time.
The result is an instant, itemized estimate your client can accept on the spot—complete with an autogenerated, brandable quote PDF.
1. Launch the CountBricks mobile app and start a voice session.
2. Answer guided prompts: tub size, substrate, visible damage.
3. Snap optional blueprint photos for AI takeoff confirmation.
4. Review the AI estimate, adjust markups, and send the quote.
5. Convert the approved quote to an invoice in one tap.
• Schedule reglazing after other dusty trades to avoid surface contamination.
• Verify water shut-off valves ahead of time to minimize delays.
• Educate homeowners on cure times—most coatings need 24 hours before light use.
• Offer anti-slip additives as an upsell; they add around $40 in material cost but boost safety.
• Bundle sink or tile refinishing to spread mobilization costs across multiple surfaces.
If the tub shows flexing, extensive rust through the substrate, or noncompliant lead glazing, replacement is often safer. CountBricks flags these red-flags during intake so you can counsel clients appropriately.
• Real-time pricing accuracy driven by regional cost databases.
• Voice-to-estimate speed that turns site visits into signed contracts.
• Branded documentation—quotes, invoices, and change orders—without extra software.
• Centralized project tracking so teams know exact material quantities and labor hours allocated.
Ready to see precisely how much reglazing a tub will cost on your next project? Visit CountBricks.com/services to schedule a live demo or start a free trial.
A Denver remodeling contractor partnered with CountBricks to tackle a 1950s bungalow featuring a heavily stained cast-iron tub. Using traditional methods, the team spent nearly 90 minutes measuring, researching coatings, and composing an email quote. With CountBricks, the same site visit produced a signed contract in under 20 minutes.
• Voice prompts captured tub dimensions, rust spots, and venting limitations in real time.
• AI matched local labor at $48 per hour and premium polyurethane at $5.25 per square foot.
• The homeowner received an itemized $615 estimate, accepted via e-signature before the crew left the driveway.
1. Speed Converts: Rapid quotes reduce the window for homeowners to collect competing bids.
2. Transparency Builds Trust: Line-item costs for prep, coating, and cleanup demonstrated professionalism.
3. Change Orders Simplified: When drywall repair around the surround emerged, CountBricks added the task and updated the invoice instantly.
• Integrate CountBricks.com/portfolio examples into your sales deck to showcase previous reglazing successes.
• Offer package pricing—tub plus tile surround—to increase average ticket value while leveraging the same mobilization.
• Use CountBricks job costing reports to compare estimated versus actual labor hours, refining future bids.
Whether you run a two-person handyman outfit or a multi-crew renovation firm, CountBricks scales with your workflow. Sign up at CountBricks.com/consultation to access free training and see firsthand how accurately our AI answers the homeowner’s first question: how much does reglazing a tub cost?
