The question “how much to install gas stove” is one of the most searched cost queries in residential construction. While national averages give rough figures, every project has its own mix of factors—venting, gas line routing, permit fees, appliance specs, and labor market rates. That’s why CountBricks built AI-powered estimating tools that talk you through the details in real time, then deliver a line-item breakdown you can trust.
• Appliance grade and BTU rating
• Distance from existing gas supply
• Venting requirements and hood installation
• Cabinet or countertop modifications
• Local permit and inspection fees
• Labor rates in your zip code
• Emergency shut-off valve and code upgrades
Homeowners often see online numbers bouncing between $650 and $3,000. Based on thousands of CountBricks estimates, a mid-range 30" freestanding stove installation in a suburban setting usually falls between $1,150 and $1,650. High-end slide-ins with custom ventilation and millwork land closer to $2,500-$4,000. Remember, these are finished costs that include appliance hookup, parts, labor, permits, and cleanup—exactly what our platform details line by line.
1. Permits: Some municipalities treat a gas stove swap as a simple mechanical permit; others require a full plumbing permit plus inspection.
2. Gas Line Size: If you’re moving from electric to gas, upsizing the branch line to ¾" can add hundreds in materials and labor.
3. Venting Path: Going through the roof costs more than back-drafting through an exterior wall.
4. Finish Carpentry: Adjusting cabinet fillers or quartz tops to accept a slide-in cooktop can extend crew hours.
Imagine standing in the kitchen, phone in hand, saying, “CountBricks, new 36-inch gas range, five feet from meter, need wall vent.” In seconds you receive a full estimate with locally indexed material pricing and labor productivity rates. Our AI listens, calculates, then soft-saves the project to your dashboard for team review.
1. Start a voice session from the CountBricks app.
2. Describe the stove model, vent type, and site conditions.
3. AI pulls current material costs and union/non-union labor data.
4. The system generates an editable scope, allowing you to add demolition or finish carpentry tasks.
5. One tap converts the estimate into a branded PDF quote ready to email.
Appliance Hookup
CountBricks scopes flexible connector, gas shut-off, thread sealant, pressure test, ignition check, and alignment levelling.
Gas Piping
We calculate linear feet of CSST or black iron, fittings, supports, and labor productivity based on wall accessibility.
Venting and Make-Up Air
Code-compliant CFM sizing, ductwork, exterior cap, and makeup-air louver costs are itemized so you see the entire airflow package.
Electrical and Controls
Many modern stoves need a 120-V receptacle. CountBricks flags this and adds AFCI/GFCI protection if required by your jurisdiction.
Permits & Inspections
Permit fees automatically populate from our zip-coded database. Inspection time is allocated so project timelines remain realistic.
• Schedule gas utility shut-off in advance to avoid costly standby hours
• Combine countertop replacement with stove installation to save on trades-mobilization fees
• Verify clearance to combustibles before ordering that commercial-style range
• Photograph existing shut-off valves; our AI can read the images and pre-fill line sizes
CountBricks recently delivered a voice-generated estimate for a 100-year-old brownstone switching from electric to gas. The AI flagged outdated ½" lines, adding a full ¾" manifold upgrade and vent chase to the roof. The homeowner received a $3,420 turnkey proposal—including plaster repair—within 15 minutes of the call. Construction wrapped in five working days, precisely on the AI forecast.
Stop guessing how much to install gas stove in your home. Start a free voice session or upload your kitchen blueprint at CountBricks.com/services. Our residential construction specialists and AI estimators will hand you an accurate, transparent budget before the next pot of coffee brews.
Cost is only the first chapter. A successful gas stove upgrade also hinges on scheduling, code compliance, and finish quality. CountBricks integrates each of these layers into your estimate to prevent onsite surprises.
• Parallel Permitting: While your appliance ships, CountBricks files permits electronically, compressing project duration by three to five days.
• Trade Stacking: Our scheduling AI aligns plumber, electrician, and carpenter visits so drywall stays intact and you avoid duplicated mobilization fees.
• Live Change-Order Control: Add a tile backsplash mid-project? Speak it into the app and receive a cost delta before work proceeds.
1. Digital Pre-Walk: Clients review 3-D kitchen scans with embedded gas line routing to approve or revise prior to demo.
2. Mid-Point Verification: After rough-in, field techs upload pressure-test results; AI compares them against baseline specs.
3. Final Sign-Off: Photographic evidence of clearances and ignition tests is stored in the project archive for warranty support.
A recent CountBricks client in Westchester County combined stove installation with a countertop refresh. By bundling tasks, they saved 18% on labor and trimmed the timeline by four days. The homeowner praised the voice-activated change-order feature that let her add under-cabinet lighting without derailing the budget.
If “how much to install gas stove” brought you here, let CountBricks take you the rest of the way. Launch a free estimating session at CountBricks.com/consultation and receive a custom roadmap that merges cost clarity with construction confidence.
