Columbus summers are getting longer, and utility bills are following the same trend. For many homeowners, central air upgrades or window units feel either too invasive or too inefficient. That is why mini split air conditioner installation in Columbus has surged. A ductless mini split delivers zoned cooling, impressive energy savings, and whisper-quiet operation—exactly what Central Ohio households need. CountBricks combines field-tested craftsmanship with AI-driven estimating to make the switch seamless.
A mini split pairs an outdoor condenser with one or more indoor air-handling heads, linked by refrigerant lines rather than bulky ducts. Each head controls its own thermostat, so you cool only the rooms you want.
• Flexible placement—high wall, floor console, or recessed cassette
• Energy-star efficiency ratings up to 30 SEER
• Simple two-inch wall penetration for line-set, keeping the building envelope tight
Whether you are renovating a German Village century home or finishing a new-build in Dublin, a mini split avoids the cost and disruption of adding ductwork. CountBricks field crews have installed thousands of units in brick basements, attic conversions, and modern additions across Franklin County.
Getting accurate numbers used to take days of manual takeoffs. With CountBricks, you can:
1. Upload blueprints or record a site walk-through with our voice AI
2. Receive real-time material counts, labor hours, and cost breakdowns
3. Approve an automatically generated estimate and project schedule
This streamlined process cuts bidding time by 70 %, helping you lock in summer installation slots before the heat hits.
• Zoned comfort lets each family member dial in their perfect temperature
• Inverter compressors ramp gently, lowering noise below 25 dB
• No ducts means no dusty attic runs or energy loss through leakage
• Rebates from Ohio utility programs make high-efficiency systems even more affordable
Every home is modeled in CountBricks.com/services software to confirm BTU requirements. Our technicians mark ideal wall positions to maximize airflow and hide line-sets.
The outdoor condenser sits on a composite pad or wall-mounted bracket to keep it above winter snow lines. A two-inch sleeve is cored through the siding or brick for insulated refrigerant lines, power, and condensate drain.
Licensed CountBricks electricians install a dedicated 240-volt disconnect. Refrigerant lines are pressure-tested with nitrogen, evacuated, and charged to factory spec.
We verify superheat, subcool, and airflow rates, then train homeowners on remote or smart-phone operation. A CountBricks project manager uploads all manuals and warranty docs to your private client portal.
Mini split projects range from $3,800 for a single-zone studio to $14,000+ for a large multi-zone retrofit. CountBricks estimates account for:
• Number of indoor heads and ceiling height
• Line-set length and difficulty of concealment inside finished walls
• Electrical panel capacity upgrades, common in 1960s ranches
• Columbus permit and inspection fees, automatically updated in our AI database
• Mount the condenser on the north or east side to boost efficiency by 5 %
• Add a low-voltage surge protector—Ohio’s summer thunderstorms are no joke
• Schedule an autumn install to avoid peak-season manufacturer price bumps
End-to-end expertise: From AI takeoffs to final inspection, one accountable partner.
Transparent pricing: Itemized tasks, materials, and mark-ups viewable 24/7 in your dashboard.
Certified technicians: EPA 608, NATE, and Ohio HVAC-R licensed crews.
Clean-site pledge: Drop cloths, shoe covers, and disposal of all packaging.
CountBricks makes mini split air conditioner installation in Columbus stress-free. Get your instant quote at CountBricks.com/consultation or call our local office to secure an installation date.
A recent CountBricks project involved a 1901 brick duplex undergoing a top-to-bottom renovation. The homeowner wanted modern comfort without compromising original plaster walls. Our solution: a four-zone mini split system.
• Blueprint upload to CountBricks.com/services generated a full takeoff in 15 minutes
• 18 k BTU outdoor unit paired with three 7 k BTU wall heads and one 9 k BTU ceiling cassette
• Custom line-set chases routed through unused chimney flues to keep interior finishes intact
• Overall project cost came in 6 % under the initial budget thanks to real-time materials pricing
1. Early collaboration between CountBricks estimators and electricians prevented a costly panel upgrade by redistributing loads across existing breakers.
2. Using a condensate pump with integral heater avoided winter freeze-ups in an unconditioned crawl space.
3. Staging the install before drywall repairs saved two extra site visits and trimmed the schedule by three days.
• Energy bills dropped 32 % compared with the previous year’s window units
• Zoned heads reduced family “thermostat wars,” improving overall comfort scores in our post-project survey
• The home’s appraisal rose by $18,000—more than covering the full HVAC upgrade investment
If you are planning a historic renovation, a new addition, or just want to reclaim your windows and lower those electric bills, CountBricks is ready. Visit CountBricks.com/portfolio for more project examples or schedule your personalized AI estimate at CountBricks.com/consultation. Experience the precision of technology blended with hands-on craftsmanship—right here in Columbus.
