For construction professionals, estimating the cost of patio doors is crucial. Prices can range from $650 to over $5,000 depending on various factors. This guide provides a detailed breakdown of costs, helping you budget accurately and avoid unexpected expenses.
• Door style and configuration (sliding, French, multi-panel, stacking)
• Frame material (vinyl, fiberglass, aluminum, wood, clad wood)
• Glass type and energy performance
• Hardware, screens, and integrated blinds
• Rough opening preparation and structural changes
• Labor rates in your zip code
• Permit and disposal fees
• Finish carpentry and interior trim package
Vinyl
Expect material costs between $450 and $1,200 for a standard two-panel slider.
Fiberglass
Material pricing usually lands between $1,200 and $2,400.
Aluminum
Thermally broken aluminum frames start around $1,500 and can exceed $3,500.
Wood & Clad Wood
Expect $2,000 to $4,500 for quality clad units.
1. Double-pane Low-E is the modern baseline
2. Triple-pane improves U-factor but adds 15-20% cost
3. Impact-rated glass for storm zones can double the glazing allowance
4. Built-in blinds add $250-$450 per panel
• Basic retrofit into an existing opening: 3–5 labor hours
• Widening a wall for a larger door: 10–14 labor hours plus framing materials
• Structural beam installation: add engineer fees and 6–8 labor hours
• Interior trim and exterior siding repair: 2–4 labor hours
Ensure accurate labor cost estimation by considering local wage rates and project complexity.
• Dumpster or haul-away fees for the existing door
• Permit application costs that vary by municipality
• Temporary weather protection if framing is left open overnight
• Touch-up painting of adjacent walls and casing
Material: $925
Labor: $640
Permit & Waste: $110
Finishes & Hardware: $175
Total Patio Doors Cost: $1,850 (±6%)
• Automated material lists sent to preferred suppliers
• One-click conversion of estimate to professional PDF quote
• Voice-guided change orders keep margins intact
1. Open your estimating tool and start a new project.
2. Describe the existing opening and desired door type.
3. Confirm measurements or scan the rough opening.
4. Review the auto-populated cost line items.
5. Adjust margins, delivery dates, and payment terms.
6. Send the quote to your client.
• Allocate 10% contingency for weather or structural surprises
• Opt for energy-efficient glass to save on long-term utility bills
• Schedule installation away from peak rain seasons
• Keep interior trim profiles consistent with adjoining rooms
When the Ramirez family wanted to replace a drafty 1970s slider with an energy-efficient three-panel fiberglass door, they called a local contractor. Here's how the numbers stacked up.
• Contractor dictated opening size, wall type, and exterior brick veneer.
• Recognized the need for a new LVL header and auto-added engineering fees.
• Real-time cost estimate: $4,720 at ±5% accuracy.
The contractor uploaded the existing floor plan. The AI takeoff tool traced the exterior wall, confirmed rough opening dimensions, and adjusted flashing tape quantities.
During demo, unexpected termite damage extended the repair scope. The contractor updated the estimate in seconds. The change order—priced at $385—was emailed to the homeowner for e-signature before work resumed.
Original estimate: $4,720
Approved change orders: $385
Final invoice: $5,105
The job closed within 1% of the revised projection, and the homeowner praised the transparency.
• Scan existing walls to reveal hidden framing conflicts.
• Use an energy calculator to upsell Low-E glass with precise ROI figures.
• Bundle drywall repair and painting tasks; optimize crew scheduling.
