Energy costs in Rhode Island rank among the highest in New England. Drafty attics, damp basements, and aging wall cavities force HVAC systems to work overtime. Spray foam insulation addresses each of these pain points in one installation, forming an airtight thermal barrier that slashes utility bills and raises year-round comfort. CountBricks technicians have completed hundreds of residential spray foam projects across Providence, Warwick, and Newport, consistently delivering savings of 20 – 40 % on heating and cooling.
Traditional insulation quotes often rely on rough square-foot pricing and outdated material costs. CountBricks changes the game by pairing on-site laser scans with real-time voice capture. While our project manager speaks measurements into the CountBricks app, our AI engine instantly translates those words into a full takeoff—right down to rim joists, rim plates, and knee walls. Homeowners leave the visit with a detailed PDF estimate, projected energy savings, and job timeline.
• Instant, voice-driven estimates reduce site time and surprises
• Real-time material pricing ensures budgets stay locked
• Integrated blueprint uploads eliminate manual data entry
• Licensed applicators trained in both open-cell and closed-cell systems
• Post-project blower door testing verifies your new air-seal
Learn more at CountBricks.com/services
• Expands up to 100 ×, filling irregular cavities
• Lower material cost
• Superior sound dampening—ideal for bedrooms and media rooms
• Vapor-permeable, allowing wood framing to dry to the interior
• Twice the R-value per inch compared to fiberglass batts
• Creates a moisture barrier—perfect for basements and rim joists
• Adds structural rigidity, increasing racking strength by up to 300 %
• Higher cost but delivers the best long-term ROI in harsh coastal climates
1. Voice Capture & AI Takeoff – Our estimator walks the home, narrating dimensions while CountBricks AI auto-fills a 3D model.
2. Moisture & Substrate Testing – We measure humidity and surface temperature to ensure optimal adhesion.
3. Site Prep – Furniture is covered, electrical boxes are masked, and temporary ventilation is installed.
4. Spray Application – Certified crews apply foam in uniform passes, maintaining manufacturer-specified lift thicknesses.
5. Trim & Clean – Excess foam is shaved flush, debris is bagged, and the space is left broom-clean.
6. Blower Door Verification – Pre- and post-tests quantify air leakage reduction for documented energy credits.
CountBricks AI continually pulls live pricing from regional suppliers, capturing fluctuations in isocyanate and resin costs. The factors below drive final numbers:
• Foam type and desired R-value
• Square footage of coverage
• Accessibility (vaulted ceilings require staging)
• Required fire-retardant coatings
• Rebate paperwork and energy audits
Visit CountBricks.com/estimate to see today’s price per board foot.
Rhode Island Energy currently offers up to $1,250 in insulation incentives per dwelling. CountBricks handles all paperwork, schedules third-party verification, and submits test results so your rebate check arrives faster. Because our AI platform stores every reading and photo, compliance documentation is generated automatically—saving both time and frustration.
Spray foam maintains over 95 % of its original insulating value for 30+ years when properly installed. CountBricks backs each project with a transferable limited lifetime warranty.
Once cured, both open-cell and closed-cell foams are inert. We employ negative-pressure ventilation and recommend re-entry after 24 hours, exceeding industry best practices.
Yes. Most projects complete in a single day, and sealed zones are isolated from living areas to keep occupants comfortable.
Tap the microphone icon in the CountBricks app or call our Providence office. In under 60 minutes you’ll have a fixed-price proposal, a 3D model of your building envelope, and a clear roadmap to lower bills—all powered by CountBricks.
A 1920s 1,650 sq ft bungalow in Providence averaged $380 per month in winter heating. The homeowner contacted CountBricks after a neighbor raved about our real-time estimating platform.
• Scope: 4” open-cell foam in attic slopes, 2” closed-cell in basement rim joists
• Time on site: 7 hours, including blower door tests
• Up-front cost: $7,950 before incentives; $6,700 net after RI Energy rebate
• Result: ACH50 reduced from 11.2 to 4.1; gas usage down 36 % the first season
1. The estimator dictated joist spans, knee-wall heights, and soffit lengths into the CountBricks mobile app. The homeowner watched as a color-coded takeoff populated in real time.
2. The software flagged an oversized roof vent that would defeat the new air-seal. Our production team scheduled cap installation the same day, avoiding a second trip charge.
3. Live supplier integration alerted us to a resin price drop, automatically updating the quote and saving the client $240.
• Ask for pre- and post-blower door numbers; air leakage reduction is the true success metric.
• Combine attic and rim joist insulation for the fastest payback—most heat escapes vertically, then through foundation gaps.
• Schedule HVAC sizing after insulation; many clients downsize furnaces and save again.
Curious what your own retrofit would look like? Upload a PDF set of your floor plan to CountBricks.com/blueprint-takeoff, or tap “Request Estimate” in the app to speak dimensions while you walk the house. CountBricks brings cutting-edge spray foam insulation RI expertise to every neighborhood in the Ocean State—one airtight home at a time.
