Every modern kitchen remodel or new build calls for a vent hood that matches both style and code compliance. Yet homeowners are often surprised by how much pricing can vary. CountBricks removes the guesswork by delivering real-time, AI-generated vent hood pricing that factors in local labor rates, material availability, and project complexity.
• Undercabinet hoods typically cost less than wall-mounted or island models
• Custom wood or metal finishes raise material and fabrication costs
• Higher CFM ratings require sturdier ducting and larger motors, increasing overall spend
• Ducted hoods involve roof or wall penetration, extra piping, and flashing
• Ductless designs rely on charcoal filters but may need more frequent maintenance
• Existing cabinetry may need modifications when retrofitting
• Open-concept layouts demand longer duct runs and bulkhead framing
• Local code requirements can add fire-rated ductwork or make-up air units
• Urban areas with higher demand see elevated hourly rates
• Seasonal workloads affect subcontractor availability
CountBricks aggregates live labor data, updating costs automatically before you even finish the conversation with our voice assistant.
• Budget undercabinet replacement: $450 – $900 (hood, duct, labor)
• Mid-range wall-mounted steel hood: $1,100 – $2,300
• Island hood with custom cladding: $2,800 – $5,000+
Remember, these are averages. A downtown loft retrofit with zero roof access can push pricing higher, while a new-build rough-in may drop costs. Use the free estimator at CountBricks.com/services to see how your zip code compares.
1. Voice Capture: Speak naturally about hood size, location, and finish. Our AI notes every specification in real time.
2. Material Matching: The engine pulls current distributor rates, flagging supply-chain surcharges and potential substitutes.
3. Task Mapping: Installation steps—demo, framing, mechanical, electrical, finish—are auto-sequenced and costed per trade.
4. Live Adjustment: Want to upgrade to a 900 CFM motor during the call? The estimate refreshes instantly, including impact on duct gauge and labor hours.
5. One-Click Proposal: Approve and instantly generate a branded PDF quote ready for client e-signature straight from CountBricks.com/portfolio.
• Makeup air dampers required for hoods over 400 CFM
• Electrical panel upgrades when adding a dedicated 15-amp circuit
• Patch and paint after duct chase installation
• Permit fees and post-inspection revisions
CountBricks flags these line-items, preventing uncomfortable budget conversations later.
• Select a hood 6 inches wider than the cooktop to boost capture efficiency
• Run ducting straight up through the roof—90-degree bends slash airflow and raise noise
• Opt for stainless baffle filters instead of mesh; they last longer and clean easier
• Schedule install after cabinets but before backsplash to avoid tile rework
• Bundle electrical work with other kitchen circuits for volume labor discounts
1. Start a voice session on the CountBricks mobile app
2. Scan or upload your kitchen blueprint for instant takeoffs
3. Confirm material selections from our pre-loaded catalog
4. Review the dynamic cost breakdown on screen
5. Generate the proposal and export to your accounting platform in seconds
Whether you’re a GC pricing a full remodel or a homeowner managing a single upgrade, CountBricks delivers transparent vent hood pricing you can trust. Visit CountBricks.com/consultation to book a demo today.
When Garcia Homes approached CountBricks to price an island hood retrofit in a 1990s ranch house, they needed accuracy fast. The space had low attic clearance, aging wiring, and no existing duct chase.
• Limited attic height required a slim duct profile
• Electrical panel was at capacity
• Homeowner wanted a custom powder-coated finish to match new cabinets
1. Voice Session: The GC dictated constraints while walking the site. Our AI documented ceiling height, hood size, and finish in real time.
2. Automated Takeoff: By uploading a quick smartphone scan of the kitchen plan, the platform measured duct run distance and flagged the need for a 600 CFM motor.
3. Dynamic Costing: Live supplier feeds showed a steel price spike. CountBricks recommended an aluminum alternative, saving $380 without sacrificing performance.
4. Permit Prep: The system added city permit fees and a make-up air damper line-item, ensuring the proposal reflected total scope.
• Initial estimate delivered in 4 minutes, 22 seconds
• Final approved contract: $3,740, within 2% of the executed cost
• Zero change orders attributed to overlooked vent hood items
Builders who rely on rough allowances risk profit erosion. CountBricks’ AI-driven vent hood pricing locks in realistic numbers before demolition starts, protecting margins and client relationships alike. Explore more success stories at CountBricks.com/portfolio.
